



- 1. Attachable fur. (Synthetic).
(Real certified fur available on request)- 2. ‘Bullet proof’ closure.
- 3. ‘Automatic’ magnet closure.
- 4. Cordura® shoulder piece.
- 5. Huge storage front pocket.
- 6. Lined side pockets.
- 7. Adjustable waist.
- 8. Cordura® waterresistant pocket.
- 9. Magnet closure.
- 10. Adjustable cuff with Velcro®.
- 11. Waterres. inner pocket.
- 12. Handwarmer pocket.
- 13. Inner hood adjustment.
- 14. Tailored elbow.
- 15. Adjustable lower waist.
- 16. Technology: Sympatex®. Bluesign® and
Oeko-tex 100® certified.- 17. Upper arm pocket.
- 18. Lazer cut pocket/welded zips.


Goosey™ is maximum quality and highly sophisticated technology packed into a layer/membrane just five micrometres thick.
With precisely tailored functions and the non-porous polyether ester structure of the membrane gives it its unique characteristics:









In this test, Goosey™ is literally ‘taken apart’ and examined in great detail.
Particular attention is paid to how strong and waterproof the seams are. The quality of workmanship of key functional components, such as zippers, hoods, pockets, seams, etc., and the hydrophobic capacity of the outer materials are also tested. All of these tests are performed in three states: unused, after washing and after dry cleaning.
The EDGAR (Enhanced Dynamic Garment Rain Tester) system simulates standard rain conditions. Goosey was tested in continuous rain for up to three hours (unused, after washing and after dry cleaning).
Jacket in the EDGAR rain testing facility

The independent Hohenstein Institute developed the so-called ‘skin model’ in order to measure the breathability of fabrics during varying degrees of physical exertion. The results convinced the testers – and delighted our developers: the Sympatex membrane provides optimal breathability, with an especially low Ret value of 1.5.
By the way, the Ret value is a measurement of water vapour permeability. It describes the force exerted by the test sample against the water vapour in the ‘skin model’ test. In this case, less is more. The less resistance there is, the more comfortable the material is, and the lower the Ret value.
Ret 6 optimal breathability
Ret 6-13 very breathable
Ret 13-20 breathable
Ret 20 not breathable
The membrane of Goosey is: Ret 1,5
The 3 ply fabric is: Ret 12
The Ret values for Goosey™ fall within the very breathable.
Skin model test of breathability

Always nice and dry: Goosey™ is 100% waterproof.
This test is performed on each product in three states: unused, after washing and after dry cleaning. All laminates are subjected to a pressure test and must be able to resist extreme water pressure levels well in excess of the required standards.
The pressure test

Control of waterproofness.
The seams must also be 100% waterproof. That is why Wakasazhi™ is sealed using a special Sympatex tape. Seams are often a weak point, so the testers pay especially close attention to the seals during the laminate pressure tests. Here too, the tests are performed in three states: unused, after washing and after dry cleaning. And the results speak for themselves.

Sympatex laminates are highly elastic (Bi-Stretch), which means they move with the wearer. In tear tests, the materials are tested to determine their tear thresholds and thus their robustness.

Sympatex laminates are hard-wearing, something that has been proven by abrasion tests using the Martindale method.

Wear resistance test for materials
Whatever happens, Goosey™ stays dry. Because all outer materials used are given a hydrophobic treatment. Moisture simply beads off rather than being absorbed by the outer material. The spray test checks the effectiveness of this hydrophobic treatment, which helps ensure the constant breathability of clothing and footwear.

Hydrophobic treatment test
After being in the hands of mother nature - it feels good to hit civilization!









